Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows can cause significant damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.
Single-pane windows are relatively simple to replace and typically fit into frames that were previously in use very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled under.
Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues like sagging. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.
Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can access the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.
If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.
UPVC handles can also become loose. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into position.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.
This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.
Check that any drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you may need to replace the window.
Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.
If the leakage is occurring between the double-glazed glass, it is website more likely the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with an ease. Any competent DIYer can replace the hinges in a matter of minutes.
Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone else helps hold the frame.
It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
The issue can be caused by opening the window improperly or by a poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide advice.
It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also be disaligned as a result of wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a good clean, but in some instances it could be necessary to have them replaced.
The seals may wear out or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the possibility of draughts.
The last way to reduce drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.
Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as possible.